Текст страницы
English
1 Postion the Dock
2 Remove Protective Strip
1. Remove the bottom cover of the dock, connect the
power cord to the dock, and then replace the cover.
Remove the protective strips on both sides of the front
bumper.
1
2
2. Place the dock on a level surface, flat against a wall,
without obstacles within 1.5m (4.9ft) in front and 0.5m (1.6ft)
on left and right.
3 Remove Protective Film
Remove the protective film on the front bumper.
0.5m (1.6ft)
0.5m (1.6ft)
1.5m (4.9ft)
Notes
• To ensure a better user experience, make sure the area is with good Wi-Fi signal.
• Do not place it in direct sunlight. Ensure the area around the dock is free of clutter
to improve docking performance.
• To prevent the risk of your robot vacuum falling downstairs, ensure that the dock is
placed at least 1.2m (4 ft) away from stairs.
• Always keep the dock powered on, otherwise the robot vacuum will not
automatically return. And do not move the dock frequently.
4