Текст страницы
EN
Before Use
1. Remove the protections
3. Place the Base Station and Connect to an
Electrical Outlet
Place the base station on level ground against the wall and plug the power
cord into the socket.
Place the base station in a location that is as open as possible with a good
Wi-Fi signal.
> 0.5 m
> 0.5 m
> 1.5 m
Note:
Do not place the base station on the carpets.
2. Install the side brush and the mop assembly
Make sure that no objects might block the signaling area.
Remove any objects that are closer than 1.5 m from the front and 0.5 m
from either side of the base station.
4. Charge the robot
When placing the robot, align the charging contacts of the robot with the
Click
charging contacts of the base station, and the robot will automatically turn
on and start charging.
Note: Install the side brush until it clicks into place.
Note: It is recommended to fully charge your robot before first time use.
10