Текст страницы
Replacement (removal) of blade
set
1/ Unplug the unit and adjust the
taper (see illustration A).
2/ Remove the screws and the
fixed blade. Save the screws.
3/ Lift off the small moving blade
and replace it with the new one
on the plastic oscillator (see
illustration B).
A.
B.
Taper
Plastic
Oscillator
Small
Moving
Blade
Cleaning & Maintenance
• To
maintain
optimum
performance,
the
appliance
should be cleaned after each use.
• Blow away any remaining hair on
the blades or use the cleaning
brush provided.
• Remove the comb guide. The
comb guide can be rinsed under
running water. Ensure they are
dried thoroughly before storage
or further use.
• Oil the blades after every use
to
ensure
optimum
cutting
performance.
CONTAINS LITHIUM ION
BATTERY. MUST BE COLLECTED,
RECYCLED OR DISPOSED OF
PROPERLY. DO NOT DISPOSE OF
IN THE GARBAGE.
4/ Replace the fixed blade using
the screws and lightly tighten
them. Adjust the teeth as shown
in illustration C, to a gap of 1mm
to 1.5mm and the small, moving
blade as centered and parallel as
possible to the fixed blade’s teeth.
1mm to
Fixed blade
C.
1.5mm
Small`
Moving
Blade
IMPORTANT NOTE:
Be sure to add a few drops of
BaBylissPRO lubricating oil to the
blades before running.
Don’t forget to tighten the screws
after the blades have been
aligned.
7