Текст страницы
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
DJR187
Length of stroke
32 mm
Strokes per minute
High (2)
0 - 3,000 min
-1
Low (1)
0 - 2,300 min
-1
Max. cutting capacities
Pipe
130 mm
Wood
255 mm
Rated voltage
D.C. 18 V
Battery cartridge
BL1815N, BL1820, BL1820B
BL1830, BL1830B, BL1840, BL1840B,
BL1850, BL1850B, BL1860B
Overall length
439 mm
Net weight
3.4 kg
3.7 kg
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications and battery cartridge may differ from country to country.
•
Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
WARNING: The vibration emission during actual
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
The tool is intended for sawing wood, plastic and fer-
rous materials.
Noise
WARNING: Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
The typical A-weighted noise level determined accord-
ing to EN60745:
Sound pressure level (LpA) : 84 dB(A)
Sound power level (LWA) : 95 dB (A)
Uncertainty (K) : 3 dB(A)
EC Declaration of Conformity
WARNING: Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN60745:
Work mode: cutting boards
Vibration emission (ah,B) : 16.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode: cutting wooden beams
Vibration emission (ah,WB) 15.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
For European countries only
Makita declares that the following Machine(s):
Designation of Machine: Cordless Recipro Saw
Model No./ Type: DJR187
Conforms to the following European Directives:
2006/42/EC
They are manufactured in accordance with the following
standard or standardized documents: EN60745
The technical file in accordance with 2006/42/EC is
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
24.4.2015
NOTE: The declared vibration emission value has
been measured in accordance with the standard test
method and may be used for comparing one tool with
another.
Yasushi Fukaya
Director
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
NOTE: The declared vibration emission value
may also be used in a preliminary assessment of
exposure.
General power tool safety warnings
WARNING: Read all safety warnings and
all instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
4
ENGLISH