Текст страницы
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
DJR188
Length of stroke
20 mm
Strokes per minute
0 - 3,000 min
-1
Max. cutting capacities
Pipe
130 mm
Wood (with 300 mm blade)
255 mm
Rated voltage
D.C. 18 V
Standard battery cartridge
BL1815N, BL1820, BL1820B, BL1830, BL1830B, BL1840,
BL1840B, BL1850, BL1850B, BL1860B
Overall length
316 mm
Net weight
2.6 - 2.9 kg
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications and battery cartridge may differ from country to country.
•
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Intended use
WARNING: The vibration emission during actual
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
The tool is intended for sawing wood, plastic and fer-
rous materials.
Noise
WARNING: Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
The typical A-weighted noise level determined accord-
ing to EN60745:
Sound pressure level (LpA) : 83 dB(A)
Sound power level (LWA) : 94 dB (A)
Uncertainty (K) : 3 dB(A)
EC Declaration of Conformity
WARNING: Wear ear protection.
For European countries only
Vibration
The EC declaration of conformity is included as Annex A
to this instruction manual.
The vibration total value (tri-axial vector sum) deter-
mined according to EN60745:
Work mode: cutting boards
Vibration emission (ah,B) : 15.5 m/s
2
SAFETY WARNINGS
Uncertainty (K) : 1.5 m/s
2
General power tool safety warnings
Work mode: cutting wooden beams
Vibration emission (ah,WB) 15.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
NOTE: The declared vibration emission value has
been measured in accordance with the standard test
method and may be used for comparing one tool with
another.
WARNING: Read all safety warnings, instruc-
tions, illustrations and specifications provided
with this power tool. Failure to follow all instructions
listed below may result in electric shock, fire and/or
serious injury.
NOTE: The declared vibration emission value
may also be used in a preliminary assessment of
exposure.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
4
ENGLISH