Текст страницы
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
DSD180
Length of stroke
6 mm
Strokes per minute
0 - 6,000 min
-1
Maximum cutting capacities
Drywall
30 mm
Wood
15 mm
Rated voltage
D.C. 18 V
Standard battery cartridges
BL1815N, BL1820, BL1820B
BL1830, BL1830B, BL1840,
BL1840B, BL1850, BL1850B,
BL1860B
Overall length
258 mm
263 mm
Net weight
1.7 kg
1.9 kg
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications and battery cartridge may differ from country to country.
•
Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
WARNING: The vibration emission during actual
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
This tool is intended for plunge-cutting of a drywall.
Wood can also be cut by installing a suitable saw blade.
Noise
WARNING: Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
The typical A-weighted noise level determined accord-
ing to EN60745-2-11:
Sound pressure level (LpA) : 79 dB(A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
EC Declaration of Conformity
WARNING: Wear ear protection.
For European countries only
Vibration
The EU declaration of conformity is included as Annex A
to this instruction manual.
The vibration total value (tri-axial vector sum) deter-
mined according to EN60745-2-11:
Work mode: cutting drywall (thickness 30 mm)
Vibration emission (ah) : 2.5 m/s
2
SAFETY WARNINGS
Uncertainty (K) : 1.5 m/s
2
General power tool safety warnings
Work mode: cutting chip board (thickness 15 mm)
Vibration emission (ah) : 5.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
WARNING: Read all safety warnings and
all instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
NOTE: The declared vibration emission value has
been measured in accordance with the standard test
method and may be used for comparing one tool with
another.
NOTE: The declared vibration emission value
may also be used in a preliminary assessment of
exposure.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
5
ENGLISH