Текст страницы
ATTENTION! Danger of fire! Never allow the device to come into contact with flammable
liquids and combustible materials. If the power cord or any other part of the device
is damaged, immediately disconnect it from the electrical network and contact the
manufacturer’s service center. In case of unskilled interference with the device device
or non-compliance with the rules of operation of the device listed in this manual, the
warranty is canceled.
ATTENTION! The surface of the heating element remains hot after the device is shut down.
ATTENTION! Do not use the appliance near water in bathrooms, showers, swimming
pools, etc.
- COMPLETENESS
- Hair curler - 1 pc.
- User Manual - 1 pc.
8. The device is not intended for use by persons (including children) with reduced
physical, sensory or mental abilities or lack of life experience or knowledge, unless
they are supervised or instructed to use the device by a person responsible for their
safety. Children should be supervised to prevent playing with the device.
9. If the device is not in use, make sure that it is turned off!
10. Do not keep the plug in the mains:
- if the appliance does not work or does not work properly;
- before and during the care of the device;
- after completion of work with this device. Do not pull or carry the appliance
by the power cord.
11. Remove the power cord by the plug to avoid damage to the power cord and do not
remove the plug from the power outlet with wet hands.
12. If the power cord is damaged, its replacement must be carried out by the manufacturer,
the service department or similar qualified personnel in order to avoid danger.
13. Do not use the device to straighten wet hair or wigs!
14. Special conditions for transportation (transportation), sale: no.
15. Should You decide to transfer the appliance to another person, please pass the
present manual over along with it.
4. WORKING PROCEDURE
1. Connect the device to the power supply and hold the ON/OFF button (2) for 2-3
seconds. The indicator light with the temperature indication will light up.
2. Choose 1 of 5 modes (130, 150, 170, 190, 210 ° C) Using the switch (7). After two minutes,
the device will heat up and be ready for use.
3. Comb your hair and divide it into equal strands.
4. Take one of the strands and fix the ends of the hair with a retainer located on the
heating element. Evenly wind a strand of hair on the heating element and leave them
in this position for 5-8 seconds (depending on the type and structure of your hair).
5. Next, unscrew a little more than half the length of the hair and release the lock. Do
the same with other strands.
6. After curling, it is necessary to let the hair cool down without combing it and not
trying to disassemble it into smaller strands. The time can be reduced to produce
light waves rather than crisp curls.
7. When the strands cool down, they can be combed and laid to create your perfect
image.
8. After use, it is necessary to disconnect the curling iron from the power supply.
You can put the device away for storage only after it has completely cooled down!
- DESCRIPTION OF THE DEVICE
- Power cord
- Control panel
- Rubberized handle
- LED display
- Convenient stand
- Safe tip
- Brush attachment
5. CARE OF THE DEVICE
Disconnect the appliance from the power supply. Wait until the heating element cools
down. Use a soft, thick cloth for cleaning. Do not immerse the device in water and do
not allow water to get on the device body. The device should be stored in a box in a dry
place. Do not wrap the wire around the appliance. Do not pull or hang the appliance
by the power cord.
ATTENTION! Risk of electric shock! Never use the appliance if your hands are wet while
taking a bath or in the shower, near the sink or other containers with liquid. If the
rectifier has fallen into the water, immediately unplug the power cord from the power
outlet. Do not touch water under any circumstances if the appliance is connected to the
mains. If you use the appliance in the bathroom, in order to avoid dangerous situations
after use, be sure to disconnect it from the mains. Water condensate is not allowed to
enter the device. Never immerse the device in water!