Текст страницы
MANUAL
31
EN
2 TECHNICAL REQUIREMENTS
2 TECHNICAL REQUIREMENTS
4 SAFETY REQUIREMENTS
4 SAFETY REQUIREMENTS
Table 1
Name of the parameter
Parameter value
Motor Type
Brushless
Battery Type
18 V UNI-M
Standard, Li-lon
The recommended charg
ing time
1,5 hours
Maximum cutting
thickness
up to 30 mm
Safety class
Class III
Weight
0.65 kg
Noise vibration parameters of the
product
Table 2
Name of the
parameter
Meaning
Noise
LpA = 68,4 dB(A),
LwA = 79,4 dB(A),
КpA = 3 dB, КwA = 3 dB
Vibration
аh = 0,1 m/s², К = 1,5 m/s²
3 ACCESSORIES
3 ACCESSORIES
Table 4
Name
Quantity
Сordless pruner
1 pc
Battery 1.5 А·h
2 pcs
Charger
1 pc
User Manual
1 pc
Hex key
1 pc
Hex socket wrench
1 pc
Oil container
1 pc
Plastic case
1 pc
The safe and stable operation of the prod
uct is guaranteed only if the following con
ditions are met:
4.1.1 Do not use the garden tool for any
purpose other than those specified in this
operating manual. The operation, mainte
nance and storage of the product must be
carried out strictly in accordance with these
operating instructions.
4.1.2 The gardening tool is not intended
for use by persons (including children) with
reduced physical, sensory or mental abili
ties or lack of life experience or knowledge,
unless they are supervised or instructed to
use the gardening tool by a person respon
sible for their safety. Children should be
supervised to prevent playing with garden
tools. Do not allow animals to come into
contact with garden tools. Do not allow chil
dren, animals or strangers in the work area.
4.1.3 Do not allow children to come into
contact with the gardening tool, even if it
is turned off.
4.1.4 Do not immerse the gardening tool or
its individual parts in water or other liquids.
4.1.5 Do not use a gardening tool if there is
a risk of fire or explosion, for example, near
flammable liquids and gases.
4.1.6 Carry the gardening tool by holding it
only by the handle (or by the base), while
it is forbidden to hold your finger on the
switch.
4.1.7 Before charging, make sure that the
power supply parameters
correspond to the parameters specified in
this manual.
4.1.8 Hold the gardening tool firmly when
working.
4.1.9 It is forbidden to install the garden
tool permanently (for example, to clamp it
in a vise).
4.1.10 Do not leave the included garden
tool unattended.
4.1.11 Nothing other than the lawn / grass /
shrub being treated should come into con
tact with moving parts of the gardening tool.