Текст страницы
3 Using the appliance
• Keep the lids of the cookware closed to reduce
3.1 Controlling the appliance
the steam evolving.
3.3 Operating the hood
Lamp
button
• Your appliance contains a motor that has vari
ous speeds.
• For better performance, we recommend using
To turn on the pro
duct lamp put the
switch in lamp po
sition. The slider set
should be in pulled
position in orderto
turn on the lamp.
low speeds under normal conditions and high
speeds in cases of strong odours and intense
vapour.
• You can start your appliance by pressing on the
1st and
2nd speed
switch.
desired speed setting button. (1, 2, 3)
• You may illuminate the cooking area by pressing
the lamp.
Put the switch in
down
position
to
operate the product
in the 1st speed
and in up position
to operate in the 2nd
speed. To turn it off,
set it to “0” position.
3.4 Replacement of Lamp
• Before replacing the light bulbs,
3. Speed
switch
disconnect the power supply of
the hood.
• Do not touch the light bulbs when
Put the switch in
down
position
to
operate the product
in the 3rd speed. To
turn it off, set it to “0”
position.
they are hot.
A
• Be careful not to touch the re
3.2 Energy efficient usage
• When operating the hood, adjust the speed level
according to the odour and vapour intensity in
order to prevent unnecessary power consump
tion.
You
may
procure
lamps
from
Authorised Service Agents.
placed light bulb directly with hands. C
• Use low speeds in normal conditions (1–2), and
high speed (3) when smell and vapours are in
tensified.
• Lamps on the hood are intended for illuminating
the cooking zone.
1
2
• Using them to illuminate the ambient/kitchen
will result in unnecessary power consumption
and inadequate illumination.
• For your device to consume less energy, run it at
a low speed level.
3
4
MAX: 2 W
• Your device will reduce energy consumption as
it will run more efficiently when you provide suf
ficient air intake to it.
• Set your device to the intense suction power
level before the formation of steam, in cases
where you know that the dense steam will occur.
So, you reduce energy consumption by using
your device for a shorter time as it will have a
sufficient air intake.
10 / EN
Hood / User Manual