Текст страницы
Chapter 1: Introduction
Motherboard Features
BIOS
• 256Mb SPI AMI BIOS® SM Flash UEFI BIOS
• ACPI 6.1, SMBIOS 3.1, UEFI 2.6 specification, PCI F/W 3.0, Plug-and-Play (PnP), SPI Dual/quad speed support, RTC
wakeup
Power Management
- Power button override mechanism
- Management Engine (ME)
- Power-on mode for AC recovery
Fan Control
• X11SCZ-F: Fan status monitoring with firmware 4-pin fan speed control via IPMI interface. Multi-fan speed control via
onboard BMC
• X11SCZ-Q: Multi-fan speed control via onboard Super I/O
System Health Monitoring
• Onboard voltage monitoring for +3.3V, +3.3V standby, +5V, +5V standby, +/-12V, VBAT, HT, Memory, PCH Temp., System
Temp., Memory Temp.
• CPU switching phase voltage regulator
• CPU Thermal Trip support
System Management
- Trusted Platform Module (TPM) support
- PECI (Platform Environment Control Interface) 3.1 support
- UID (Unit Identification)/Remote UID
- System resource alert via SuperDoctor® 5
- Watch Dog, NMI
LED Indicators
- Power/Suspend-state indicator LED
- UID/remote UID (X11SCZ-F only)
Dimensions
• 9.6" (L) x 9.6" (W) (243.84mm x 243.84mm)
Note 1: The CPU maximum thermal design power (TDP) is subject to chassis and
heatsink cooling restrictions. For proper thermal management, please check the chas
sis and heatsink specifications for proper CPU TDP sizing.
Note 2 (X11SCZ-F only): For IPMI configuration instructions, please refer to the
Embedded IPMI Configuration User's Guide available at http://www.supermicro.com/
support/manuals/.
Note 3 (X11SCZ-F only):: It is strongly recommended that you change BMC log-in
information upon initial system power-on. The manufacture default username is ADMIN
and the password is ADMIN. For proper BMC configuration, please refer to https://www.
supermicro.com/products/nfo/IPMI.cfm.
15