Текст страницы
English
DRILL/DRIVER DCD703
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm
(relevant for vibration), organisation of work patterns.
EC‑Declaration of Conformity
Congratulations!
You have chosen a DeWALT tool. Years of experience, thorough
product development and innovation make DeWALT one of the
most reliable partners for professional power tool users.
Technical Data
Machinery Directive
Sub‑Compact Drill/Driver
DCD703
DeWALT declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN62841‑1:2015, EN62841‑2-1:2018+A11:2019.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact DeWALT at
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of DeWALT.
20
10
DCD703
Voltage
VDC
12
Type
1
Battery type
Li‑Ion
Power output
W
250
No‑load speed
1st gear
min‑1
0–425
2nd gear
min‑1
0–1500
Max. Torque (hard/soft)
Nm
57.5/25.5
Chuck capacity
mm
10
Maximum drilling capacity
Wood
Metal
Masonry
mm
mm
mm
-
Weight (without battery pack or heads)
kg
0.73
Noise values and/or vibration values (triax vector sum) according to
EN62841‑2-1:
Markus Rompel
Vice President of Engineering, PTE‑Europe
DeWALT, Richard‑Klinger‑Straße 11,
65510, Idstein, Germany
10.06.2021
LPA (emission sound pressure level)
dB(A)
72
LWA (sound power level)
dB(A)
83
K
(uncertainty for the given sound level)
dB(A)
5
Drilling into metal
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY)
REGULATIONS 2008
Vibration emission value ah,D =
m/s2
2.5
Uncertainty K =
m/s2
1.5
Screwdriving
Vibration emission value ah =
m/s2
< 2.6
Uncertainty K =
m/s2
1.5
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.
Sub‑Compact Drill/Driver
DCD703
DeWALT declares that these products described under
Technical Data are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended), EN62841‑1:2015, EN62841‑2-
1:2018+A11:2019
These products conform to the following UK Regulations
Electromagnetic Compatibility Regulations, 2016, S.I.2016/1091
(as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total working period.
3