Текст страницы
źІżLISHăĚЇrТРТЧКХăТЧstruМtТШЧsě
SPECIFICATIONS
Model:
TD110D
Fastening capacities
Machine screw
4 mm - 8 mm
Standard bolt
5 mm - 12 mm
High tensile bolt
5 mm - 10 mm
No load speed
0 - 2,600 min
-1
Impacts per minute
0 - 3,500 min
-1
Overall length
153 mm
Rated voltage
D.C. 10.8 V
Battery cartridge
BL1015, BL1020B
BL1040B
Net weight
1.0 kg
1.2 kg
•ă
DuОătШăШurăМШЧtТЧuТЧРăЩrШРrКЦăШПărОsОКrМСăКЧНăНОЯОХШЩЦОЧt,ătСОăsЩОМТiМКtТШЧsăСОrОТЧăКrОăsuЛУОМtătШăМСКЧРОă
without notice.
•ă
SЩОМТiМКtТШЧsăКЧНăЛКttОrвăМКrtrТНРОăЦКвăНТППОrăПrШЦăМШuЧtrвătШăМШuЧtrв.
•
Weight, with battery cartridge, according to EPTA-Procedure 01/2003
IЧtОЧНОНăusО
The tool is intended for screw driving in wood, metal
and plastic.
АůRІIІżŚ The vibration emission during actual
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
Noise
АůRІIІżŚ Be sure to identify safety measures to
protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
The typical A-weighted noise level determined accord-
ing to EN60745:
Sound pressure level (LpA) : 94 dB(A)
Sound power level (LWA) : 105 dB (A)
Uncertainty (K) : 3 dB(A)
źűăDОМХКrКtТШЧăШПăűШЧПШrЦТtв
АůRІIІżŚ АОКrăОКrăprШtОМtТШЧ.
For European countries only
VТЛrКtТШЧ
The vibration total value (tri-axial vector sum) deter-
mined according to EN60745:
Work mode: impact tightening of fasteners of the maxi-
mum capacity of the tool
Vibration emission (ah) : 8.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
Makita declares that the following Machine(s):
Designation of Machine: Cordless Impact Driver
Model No./ Type: TD110D
Conforms to the following European Directives:
2006/42/EC
They are manufactured in accordance with the following
standard or standardized documents: EN60745
TСОătОМСЧТМКХăiХОăТЧăКММШrНКЧМОăаТtСă2ŃŃ6/42/ECăТsă
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
24.2.2015
NOTE: The declared vibration emission value has
been measured in accordance with the standard test
method and may be used for comparing one tool with
another.
NOTE: The declared vibration emission value
may also be used in a preliminary assessment of
exposure.
Yasushi Fukaya
Director
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
żОЧОrКХăpШаОrătШШХăsКПОtвăаКrЧТЧРs
АůRІIІżŚ RОКНăКХХăsКПОtвăаКrЧТЧРsăКЧНăКХХă
ТЧstruМtТШЧs.ăFailure to follow the warnings and
ТЧstruМtТШЧsăЦКвărОsuХtăТЧăОХОМtrТМăsСШМФ,ăirОăКЧН/Шră
sОrТШusăТЧУurв.
4
ENGLISH