Инструкция шуруповерт Makita TD111DWAE

Страница PDF

Страница 1

ENGLISH: INSTRUCTION MANUAL Original instructions Cordless Impact Driver TD111D Read before use.

Читать страницу

Страница PDF

Страница 2

SPECIFICATIONS Model: TD111D Fastening capacities Machine screw 4 mm - 8 mm Standard bolt 5 mm - 14 mm High tensile bolt 5 mm - 12 mm No load speed Hard impact mode 0 - 3,000 min -1 Soft impact mode 0 - 1,300 min -1 Imp…

Читать страницу

Страница PDF

Страница 3

Personal Safety 7. Use the power tool, accessories and tool bits 1. Stay alert, watch what you are doing and use etc. in accordance with these instructions, tak- common sense when operating a power tool. ing into accoun…

Читать страницу

Страница PDF

Страница 4

Important safety instructions for FUNCTIONAL battery cartridge DESCRIPTION1. Before using battery cartridge, read all instruc- tions and cautionary markings on (1) battery charger, (2) battery, and (3) product using bat…

Читать страницу

Страница PDF

Страница 5

Overloaded:The tool is operated in a manner that causes it to draw Switch action an abnormally high current. In this situation, turn the tool off and stop the application that caused the tool to become overloaded. Then…

Читать страницу

Страница PDF

Страница 6

Reversing switch action 1 A B ► 1. Button 1 Pull the switch trigger to turn on the lamp. To turn off, ► 1. Reversing switch leverrelease it. The lamp goes out approximately 10 seconds after releasing the switch trigger.…

Читать страницу

Страница PDF

Страница 7

Impact force grade displayed Maximum blows Purpose Example of application on panel Hard 3,900 min -1 (/min) Tightening when force and Tightening wood screws, speed are desired. tightening bolts. Soft 1,600 min -1 (/min)…

Читать страницу

Страница PDF

Страница 8

OPERATION 1 2 3 ► 1. Driver bit 2. Bit-piece 3. Sleeve To remove the driver bit, pull the sleeve in the direction of the arrow and pull the driver bit out. The proper fastening torque may differ depending upon NOTE: If…

Читать страницу