Текст страницы
Disassembly and Assembly
3 While pulling up the suction cup with strong, steady force to create the gap between
the cover screen and the metal frame, place the opening pick in the gap between the
cover screen and the metal frame and slide the opening pick back and forth along the
edge to slice through the adhesive. Repeat this on the top and bottom sides of the
cover screen and slice through the adhesive. Lift up the cover screen slowly.
• As the cover screen can be damaged by excessive force, be careful not to damage the cover screen.
• As the internal circuitry can be damaged, do not insert the opening pick more than 1-2 mm.
• Be careful not to damage the camera.
• Make sure to leave the opening pick inserted in the edges to prevent the
adhesive from resealing. It is recommended that a larger area of the opening
pick be inserted.
• If you have trouble creating a gap, heat the microwaveable heating bag
additionally, and apply it on the cover screen to further soften the adhesive.
When reheating, it should be heated no longer than 30 seconds.