Текст страницы
Disassembly and Assembly
4 Insert the opening pick into the gap created by lifting the suction cup. Slide the
opening pick back and forth along the top edge to remove the adhesive. Repeat this
on all sides and remove the adhesive. Lift up the cover screen slowly and remove it
gently.
• If the gel pack is too hot, you may get burned. Be careful when you use it and recommend wearing gloves.
• It is possible for the device or battery to be damaged by heat.
• Do not heat the device in a microwave. Doing so could cause an explosion.
• If your device’s glass breaks, the debris can cause injury to your hands or
other body parts. For your safety, attach an acrylic protective cover before
disassembling the device.
• As the cover screen can be damaged by excessive force, be careful not to damage the cover screen.
• As the internal circuitry can be damaged, do not insert the opening pick more than 1-2 mm.
• Make sure to leave the opening pick inserted in the edges to prevent the adhesive from resealing.
• If you have trouble creating a gap, heat the microwaveable heating bag
additionally, and apply it on the cover screen to further soften the adhesive.
When reheating, it should be heated no longer than 30 seconds.