Текст страницы
2. Shut off the tap so that no more water flows in and
has to be drained. Switch the appliance off. Unplug the
power plug.
3. Open the drain filter cover.
4. Use the pull-out drain hose located in the pump access
opening to drain the remaining water into a suitable
container (up to 5.3U.S.gallon/20 liters of water may
be drained). Pull the sealing cap from the hose and lay
the hose over the side of the container and allow the
water to finish draining from the drum. When finished,
replace the sealing cap into the end of the hose and
restore the hose to its storage location.
5. Turn the pump cover counterclockwise to remove it.
A small amount of residual water may flow out when
the cover is removed. Clean the interior of the pump
hosing, removing any debris or foreign objects. Check
to be sure the impeller where at the back of the pump
housing can now turn freely. Remove any lint, debris
or detergent residue from the threads of the pump
cover and the pump cover housing. Reinstall the pump
cover by screwing tightly into position. Handle must
be vertically.
6. Close the drain filter cover. Wipe up any spilled water.
83
www.hiberg.ru