Текст страницы
AUTOMATIC WASHING MACHINE
DEVICE DESCRIPTION
1
5
2
1.
Detergent drawer
2.
Drain hose
3.
Door
4.
Adjustable feet
5.
Control panel
6.
Power cord
7.
Drain filter cover
3
6
7
4
*The device shown in the figure is for informational purposes only and may differ from your model.
ATTENTION! During the first use, it is possible to pump out a small amount of
water, this is not a manufacturing defect, since the water may remain after several
tests performed by the manufacturer.
INSTALLATION AND CONNECTION
Before using the washing machine, make sure that the electricity, water supply and
sewerage meet the stated requirements. If this is not the case, call a qualified technician
and plumber.
ATTENTION! Before installing the appliance, make sure that the washing
machine, as well as the water supply and drain hoses and the power cord were not
damaged during delivery and installation. If there are any defects, do not install or
use the washing machine, it can be dangerous.
Installation Location
• Do not place it on carpet or similar surfaces. Place the product on a hard and level
floor with sufficient load-bearing capacity.
• Do not place the product on the power cable.
• Do not install the product in places where the temperature may drop below 0°C.
• Place the product at a distance of at least 1 cm from other furniture.
Removing packaging reinforcement
Tilt the machine backwards to remove the packaging reinforce
ment. Remove the packaging reinforcement by pulling the ribbon.
31
USER GUIDE