Текст страницы
AUTOMATIC WASHING MACHINE
Rinse +Spin
---
8
---
---
O
Combines a rinse and spin for loads requiring an
addational rinse cycle. Also use for loads that require
rinsing only.
Drum clean
85
---
Clean the drum by removing dirt and bacteria from
the drum. Make sure the drum is empty.
---
---
---
K-Smart
40
5
Special cycle which can be started simply by
pressing the ONE-TOUCH button.
L / P
---
O
L=gel-/liquid detergent P=Powder detergent O=Optional ---=No
CLEANING AND SERVICE
Keep the washing machine and the door seal clean. Before washing, disconnect it
from the power supply!
1. The outside of the washing machine body can be wiped with a clean cloth soaked in
warm water with liquid detergent. Then wipe dry with a dry cloth.
2. Do not use sharp metal scrapers, caustic and abrasive cleaning agents, as they can
scratch the surfaces.
3. Do not use a high-pressure cleaner or steam jet cleaners, as penetrating moisture
can cause electric shock.
4. After cleaning, check that the power cord is not damaged. Then insert the plug firmly
into the wall outlet.
ATTENTION! Do not use abrasive substances, gasoline, benzene, solvents,
hydrochloride, hot water, metal, or coarse brushes, etc.for cleaning, as they can
damage the surface of the washing machine.
DRUM CLEANING
- Open the washing machine door to dry the drum.
- If rust has formed in the drum, remove it in a timely manner with a chlorine-free
product.
CLEANING THE DETERGENT CONTAINER
1. Fully open the detergent drawer. Press the drawer lock (1) and pull the tray (2) out of
the appliance body.
2. Remove the liquid detergent cover (3) by grasping it and pulling upwards.
Clean the detergent cap and the detergent container by holding them under the water jet.
Wipe off any remaining detergent.
3. Replace the liquid detergent cap, slide the detergent container back into place.
WARNING Do not use abrasives, benzene, benzene, thinner, chloride, hot
39
USER GUIDE