Текст страницы
- Brush
- HEPA filter
English
GENERAL POWER TOOL SAFETY
WARNINGS
Read all safety warnings and all instructions.
Vacuum cleaner for dry and wet
cleaning
Failure to follow the warnings and instructions may
result in electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference. The
term “power tool” in the warnings refers to your main-sop-
erated (corded) power tool or battery-operated (cord-less)
power tool.
Work area safety
• Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
Intended Use
• This vacuum cleaner is intended for domestic use
only. Only use this vacuum cleaner in accordance
with the in-structions in this instruction manual.
The vacuum cleaner is suitable for vacuuming dry ma-
teri-als and, by taking suitable measures, also for vacuum-
ing liquids. The manufacturer will not accept any respon-
sibility for damage caused by improper use or incorrect
operation. Therefore, you must note the following points.
The vacuum cleaner must only be operated with:
The vacuum cleaner must only be operated with:
• Do not operate power tools in explosive atmospheres,
such as in the presence of fl ammable liquids, gases or
dust. Power tools create sparks which may ignite the dust
or fumes.
• Manufacturer’s original dust bags
• Manufacturer’s original replacement parts, accessories or
special accessories
• Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
• The fi lter cleaning system (FCS +) is designed for use in
conditions where a large amount of fi ne dust is sucked
in without a fi lter bag. The FCS + fi lter cleaning system
allows the HEPA fi lter to be cleaned of dust deposits by
reversing the air flow.
Electrical safety
• Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodifi ed plugs and
matching outlets will reduce risk of electric shock.
• The vacuum cleaner has a socket with a protective IP54
contact. It can include an external power tool. Pay atten-
tion to the maximum permissible total power consump-
tion of the connected power tool.
Technical specifications (fig. 1)
• Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators. There is
an increased risk of electric shock if your body is earthed
or grounded.
• Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
• Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges and moving parts. Damaged or
entangled cords increase the risk of electric shock.
• When operating a power tool outdoors, use an extension
cord suitable for outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric shock.
• If operating a power tool in a damp location is unavoid-
able, use a residual current device (RCD) protected sup-
ply. Use of an RCD reduces the risk of electric shock.
Personal safety
• Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or under the infl uence of drugs,
alcohol or medication. A moment of inattention while op-
erating power tools may result in serious personal injury.
Product elements (fig. 2)
1. Suction inlet
2. Top housing
3. On/off switch
4. Carry handle
5. Tank
6. Bottom chassis
7. Rear wheel
8. Castor
9. water brush
10. Metal Telescopic tube
11. Crevice nozzle
12. Hose
13. Carpet/hard floor brush
14. 2-in-1 Nozzle
15. Water cut out sensor(probe)
16. HEPA
17. HEPA hook
18. Blow outlet
19. Head lock
20. Socket
• Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask, non-
skid safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
The complete set includes:
• Hose
• Plastic tube
• Floor brush
• Crevice nozzle
• Prevent unintentional starting. Ensure the switch is in
the off -position before connecting to power source and/
or battery pack, picking up or carrying the tool. Carrying
7