Текст страницы
Three-function Welding Machine
Dispose of waste
Damaged power tools, batteries, acces-
sories and waste packaging materials
must be recycled and reused in an envi-
ronmentally friendly manner.
Do not throw power tools and accumulators /
batteries into general household waste!
Product serial number interpreta-
tion serial number
Maintenance and Service
Maintenance and Cleaning
►Pull the plug out of the socket before
carrying out any work on the power
tool.
►Remove dust by dry and clean com-
pressed air regularly. If welding machine
is operated in environment where strong
smoke and polluted air is present, the ma-
chine needs to be cleaned at least once a
month.
►Pressure of compressed air must be
within reasonable range in order to
prevent damage to small and sensitive
components in the machine.
►Check internal circuit of welding ma-
chine regularly and make sure the
circuit connections are connected
correctly and tightly (especially plug-
in connector and components). If scale
and rust are found, please clean it, and
connect again tightly.
►Prevent water and steam from enter-
ing into the machine. If that happens,
please blow it dry and check insulation
of machine.
►If welding machine will not be used for
long time, it must be put into the pack-
ing box and stored in dry and clean
environment.
In order to avoid safety hazards, if the power
supply cord needs to be replaced, this must
be done by P.I.T. or by an after-sales service
centre that is authorised to repair P.I.T. power
tools.
Service
►Have your power tool repaired only by
qualified personnel and only with origi-
nal replacement parts. This ensures the
safety of the power tool.
The list of authorized service centers can be
viewed on the official website of P.I.T. by the
link: https://pittools.ru/servises/
Storage and transportation
The welding machine should be stored in
closed rooms with natural ventilation at tem-
peratures from 0 to + 40 ° С and relative
humidity up to + 80%. The presence of acid
vapors, alkalis and other aggressive impuri-
ties in the air is not allowed.
Products can be transported by any type of
closed transport in the manufacturer’s pack-
aging or without it, while preserving the prod-
uct from mechanical damage, atmospheric
precipitation.
The date of manufacture of the product is
encoded in the serial number printed on the
body of the tool. The first 2 digits indicate the
year of issue, the next 2 digits indicate the
month.
TERMS OF WARRANTY SERVICE
To customers (users) of warranty service:
1. This warranty certificate is the only docu-
ment that confirms your right to free warranty
service. If this proof is not presented, no
claims will be accepted. Warranty certificates
cannot be recovered if lost or damaged.
2. It is required to provide a valid and legal
document for purchasing the product. The
document must have the name or seal of the
sales company; at the same time, state the
full model name of the purchased P.I.T. prod-
uct, the serial number on the nameplate of the
fuselage, and the date of purchase, and the
required warranty. The whole machine and its
accessories.
The warranty period:
1. The warranty period of the product is 12
months from the date of sale. During the
warranty period, the service department
will eliminate manufacturing defects free of
charge and replace the parts that fail due to
the manufacturer’s fault. In warranty repair, an
equivalent operable product is not provided.
Replaceable parts become the property of the
service provider.
2. The wear degree on the diameter of the
motor rotor commutator is less than 0.4 mm
(except for brushless motor tools), and the
internal damage caused by the quality of the
tool belongs to the warranty.
The following situations occur during the
warranty period, which is not covered by the
warranty:
1. In the absence of any valid legal docu-
ments (invoices) such as warranty certificates
12