Текст страницы
CLEANING
base while making sure that it is seated cor
rectly.
- Disconnect the appliance from the mains and
USE:
allow it to cool before undertaking any cleaning
task.
- Extend the cable completely before plugging
it in.
- Clean the electrical equipment and the mains
- Connect the appliance to the mains.
connection with a damp cloth and dry. DO
NOT IMMERSE IN WATER OR ANY OTHER
LIQUID.
- Turn the appliance on, by using the on/off
- Clean the equipment with a damp cloth with a
button (1). The appliance starts operating with
mist.
few drops of washing-up liquid and then dry.
- You can adjust the mist flow, timer and night
- Do not use solvents, or products with an acid or
light through the touch screen (J).
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Choose the desired mist flow by pressing the
selector (2).
- Never submerge the appliance in water or any
other liquid or place it under running water.
- We recommend you start with a low flow to
- Never submerge the connector in water or any
avoid condensation and increase this if neces
sary.
other liquid or place it under running water.
- If there is insufficient water in the tank, a red
- If the appliance is not in good condition of
cleanliness, its surface may degrade and
inexorably affect the duration of the appliance’s
useful life and could become unsafe to use.
light will flash with a beep for 9 seconds and
the humidifier will turn off. Before turning the
device back on, it will be necessary to refill the
tank with water.
- Then dry all parts before its assembly and
- If during the operation you want to have the
storage.
- There may be some scale deposits in the trans
ducer (E), particularly in areas with hard water:
- Overcome this drawback by cleaning the
touch screen turned off, press and hold the
Led Light button (3) for 2 seconds. To turn it
on again, press the Timer button (4) or Mist
flow button (2) or On/off led light button (3) for
1 second.
transducer (E).
- When you want to stop the appliance from
- Rub down with a dry cloth and remove remains
emitting steam, press the On / Off button (1).
of moisture.
- During the operation, the internal temperature
- Do not place the transducer directly under the
tap.
of the humidifier and the relative air humidity
are displayed on the screen.
- Do not rub the transducer with hard or metal
LIGHT FUNCTION:
objects.
- The appliance has a night light function. To
- Do not clean with chemical products.
activate and deactivate this function press the
button (3) on the touch screen.
HOW TO DEAL WITH LIME SCALE
INCRUSTATIONS:
TIMER FUNCTION
- For the appliance to work correctly it should be
- The appliance’s operating time can be control
led (1, 2, 4, 8 hours).
kept free of limescale or magnesium incrusta
tions caused by the use of hard water.
- To program the operating time simply select it
- To prevent this kind of problem, we recommend
using the screen button (4).
the use of water with low lime or magnesium
mineralisation.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- However, if it is not possible to use the kind
- Unplug the appliance from the mains.
- Remove the water from the water tank.
of water recommended above, you should
periodically remove the limescale from the
appliance:
- Clean the appliance.
- Every 6 weeks if the water is “very hard”.
- Every 12 weeks if the water is “hard”.