Текст страницы
UPPER
LOWER
OR
Installing the Phone (Phone Stand):
1. Insert the hooks on top of the stand into a slots, you have options
to use either upper OR lower slots.
2. Firmly slide the stand upward to lock it in place.
Installing the Phone (Wall Mount):
To setup the GXP1620/1625, follow the steps below:
1. Connect the handset and main phone case with the
phone cord.
2. Connect the LAN port of the phone to the RJ-45 socket
of a hub/switch or a router (LAN side of the router) using the
Ethernet cable.
3. Connect the 5V DC output plug to the power jack on the
phone; plug the power adapter into an electrical outlet.
4. The LCD will display provisioning or firmware upgrade in-
formation. Before continuing, please wait for the date/time
display to show up.
5. Using the phone embedded web server or keypad con-
figuration menu, you can further configure the phone using
either a static IP or DHCP.
Tips For Using the Keypad:
Message Waiting
Indicator
Line Key
Softkey
Message
Record
Phonebook
Menu/OK key
Navigation keys
Page/Intercom
Home Button
Mute
Hold
Headset
Conference
1. Insert all 4 hooks located in the front of wall mount into the slots.
2. Firmly slide the wall mount upward to lock it in place.
3. Pull out and rotate the tab from handset rest to hold the handset
while the phone is mounted on the wall.
Transfer
Speaker
CONNECTING THE PHONE:
Volume
Send
Standard Keypad
LAN Port Power
Handset Port
PC Port
Headset Port
4
1. To access the MENU, press the round MENU button.
2. Navigate the menu by using the UP/DOWN and LEFT/
RIGHT buttons.
3. Press the round MENU button to confirm a menu selec-
tion.
4. The phone automatically exits MENU mode when there
is an incoming call, the phone goes off-hook, or when the
MENU mode is left idle for 60 seconds.
3