Текст страницы
Installing the phone (Phone Stand) :
PHONE SETUP:
For installing the phone on the table with the phone stand, attach the phone stand
to the bottom of the phone where there is a slot for the phone stand. (Upper half,
bottom part).
CONNECTING THE PHONE:
USB Port
Slot for the wall
mount spacers and
phone stand
Handset Port
Extension
Module Port
Installing the phone (Wall Mount):
1. Attach the wall mount spacers to the slot for wall mount spacers on the back
of the phone.
PC Port
LAN Port
Power
Headset Port
2. Attach the phone to the wall via the wall mount hole.
3. Pull out the tab from the handset cradle (See figure below).
To setup the GXP2140, follow the steps below:
1. Connect the handset and main phone case with the phone cord.
4. Rotate the tab and plug it back into the slot with the extension up to hold the
handset while the phone is mounted on the wall (See figure below).
Handset Rest
2. Connect the LAN port of the phone to the RJ-45 socket of a hub/switch or a
router (LAN side of the router) using the Ethernet cable.
Tab with extension up
3. Connect the 12V DC output plug to the power jack on the phone; plug the power
adapter into an electrical outlet.
4. The LCD will display provisioning or firmware upgrade information. Before con
tinuing, please wait for the date/time display to show up.
Tab with extension down
5. Using the phone embedded web server or keypad configuration menu, you can
further configure the phone using either a static IP or DHCP.
3
4