Текст страницы
IM2025
NOTE: Before use, remove the plastic battery cover from the bottom of the remote
control.
– Press the button to turn on the device. The device will operate in the light
heating mode. Press the button again to switch the device to standby mode.
– Press the button once - the device will operate in the light heating mode of 800
W. Press the button once more - the device will operate in the strong heating mode of
2000 W. Press the button a third time, the device will operate in the ventilation mode.
– Press the button to activate the rotation of the device body. Press the button
again to stop the rotation.
– Press the button to set the timer for turning off the device. The time can be set
in the range from 1 to 12 hours. One press of the button equals 1 hour.
– Press the buttons to increase/decrease the temperature.
– Press the button to activate the imitation of the fireplace.
8. MAINTENANCE
Prior to preventive cleaning, make sure that the appliance is switched off and
unplugged from the electric mains.
Regular cleaning recommendations:
Switch off the appliance, wait until the ventilation mode is disabled;
Unplug the appliance from the electric mains;
Let the appliance cool down, then clean the unit’s body with a soft, slightly
damp cloth;
It is not recommended to use detergents, including materials containing
abrasive elements.
Do not damage the unit’s surface by sharp objects.
9. TROUBLESHOOTING
If it is impossible to fix these malfunctions with these methods, contact the authorized
service center.
Malfunction
Possible cause
Solution
The device is
connected
to the mains,
operating mode is set
to heating but device
doesn’t work.
No power
Check whether the power
supply is disconnected from
the device and, if necessary,
connect device to power supply
Electrical circuit of heating
element malfunction
Contact an authorized service
center
17