Текст страницы
English
4
Attach the EAP/CAP to the mounting bracket by
aligning ARROW 1 (on the EAP/CAP) with ARROW
2 (on the mounting bracket), then rotate the EAP/
CAP clockwise until it locks into place.
5 Connect the Ethernet cable to the ETHERNET port.
■
■
Option2: Ceiling Mounting
Follow the steps below to install the EAP/CAP with the provided accessories:
Washers
(Qty.3)
M3×30 Pan-head Screws
(Qty.3)
Wing Nuts
(Qty.3)
1 Remove the ceiling tile.
X3
2
Place the mounting bracket in the center of the
ceiling tile. Mark three positions for the screw
holes and a position for the Ethernet cable hole.
Drill three 4mm diameter holes for the screws
and a 25mm diameter hole for the Ethernet
cable at the marked positions.
Hole for Ethernet cable
3