Текст страницы
English
X3
1
If your Ethernet cable feeds through the wall,
you can position the mounting bracket to make
the cable through the fixing hole. Mark three
positions for the screw holes and then drill three
6mm diameter holes at the marked positions.
2 Insert the plastic wall anchors into the 6mm diameter holes.
3
Secure the mounting bracket to the wall by
driving the self-tapping screws into the anchors.
Make sure that the shoulders of the mounting
bracket are on the outside.
4 Connect the Ethernet cable to the ETHERNET port on the EAP/CAP.
5
Attach the EAP/CAP to the mounting bracket by
aligning the arrow mark on the EAP/CAP with the
arrow mark on the mounting bracket, then rotate
the EAP/CAP until it is locked into place.
5