Инструкция точка доступа Ubiquiti PowerBeam 2AC-400

Accessing airOS via Wi-Fi

Verify connectivity in the airOS Configuration Interface. There
are two methods, the UNMS™ App and Web Portal. Both are
available for 15 minutes immediately after you power on the
PowerBeam. If necessary, you can power cycle the PowerBeam
to re-enable its Wi-Fi.

Proceed to the appropriate instructions:

UNMS App

1. Download the UNMS app from the App Store (iOS) or

Google Play™ (Android).

2. Connect your device’s Wi-Fi to the PowerBeam SSID

named: PBE-2AC-400:<MAC Address>

Note: Ensure that DHCP is enabled on your
Wi‑Fi adapter.

1. Launch the app.
2. Tap the PowerBeam on the Connections screen.