Текст страницы
7
EN
bread toasting (1). Set the required toasting level with
the control kn¬ob (4), press the carriage control lever
• Set the toasting level of the toasts by turning the
control knob (4):
«1» - minimal toasting level;
(2) until it latches and then press the button (5) «
»;
«7» - maximal toasting level.
Notes:
the button (5) «
» and the stop button (3) «
»
illumination will light up.
REHEATING MODE BUTTON (6) «
»
• To reheat cold toast, put the toasts in to the slots (1),
press on the carriage control lever (2) until it latches,
then press the «reheat» button (6) «
», the butt¬on
(6) «
» and the stop button (3) «
» illumination
will light up.
CRUMB TRAY
-
the toasting level depends on the sort of bread
and thickness of slices. Optimal thickness of the
slices should not exceed 25 mm;
-
select the toasting level by setting the control knob
(4) to the¬ needed position.
-
do not use very thin slices of bread, because they
do not center in the toaster.
• Press on the carriage control lever (2) until fixed, the
toasting stop button (3) «
» illumination will light
up.
• When the toasts are ready, the toaster will be
switched off automatically, the lever (2) will return to
its initial position.
TOASTING STOP BUTTON (3) «
»
• Bread crumbs are accumulated in the tray (8),
regularly clean the tray (8).
• Switch the toaster off and unplug the power cord plug
from the mains socket, wait until the toaster cools
down.
• Remove the crumb tray (8), clean it off the crumbs
and inst¬all the tray back to its place.
CLEANING AND CARE
• If you need to switch the toaster off or stop the
toasting process, press the button (3) «
».
• The toaster will be switched off, and the lever (2) will
return to the initial position.
DEFROSTING MODE BUTTON (5) «
»
• Before cleaning unplug the unit and leave it open to
cool down.
• Wipe the toaster maker body with a slightly damp
cloth, and then wipe it dry.
• To toast frozen bread, put the slices in to the slots for