Текст страницы
Should You decide to transfer the appliance to another person, please pass the present
manual over along with it.
4. OPERATING INSTRUCTIONS
PREPARATIONS FOR USE
Before connecting the appliance to power supply ensure that the power grid voltage
corresponds to that indicated on the appliance.
Remove all packaging materials.
NOTE:
Turn the toaster on for the first time without putting bread in it to allow the heating
elements to heat up and bun off any dust accumulated on them during assembly.
ATTENTION!
- Electric shock hazard! Never submerge the appliance in water!
- Fire hazard! Avoid all contact of the appliance with flammable liquids and combustible
materials!
- The outer surface of the appliance stays hot after operation.
- Careful: accessible surfaces of the appliance can reach high temperature during
operation. Do not touch the hot surfaces.
- Toasting thick slices of bread takes a substantial time. These can be toasted using
two operating cycles.
- When toasting bread with raisins or other fruits remove these from the surface
of the slices to prevent them from falling into the toaster or sticking to the metal
surfaces inside the slot.
- Toasting a single slice only: if you wish to toast only a single slice, select a lower
toasting level. The toaster is designed for toasting two slices at a time, therefore both
chambers are heated. Reduce the toasting time so that the slice is not overly browned.
- Frozen breads: frozen waffles, pancakes and French toasts should be heated using
the DEFROST function.
WARMING UP
If necessary you can warm up cooled down toasts. This mode allows to warm the bread
up without additional toasting.
Press the WARM-UP button (11). The relevant indicator will light up on the display.
DEFROSTING
The DEFROST button is provided to defrost the bread first and then toast it, which slightly
lengthens the toasting cycle.
Press the DEFROST button (8) to activate the function. The indicator above the relevant
button will light up.
- APPLIANCE DESCRIPTION
- Toaster housing
- Slots for toasts
- Start lever
- Crumb tray
- LED display
- CANCEL button
- DEFROST button
- Toasting level selector button
- SINGLE SIDE TOASTING button
- WARM-UP button
SINGLE SIDE TOASTING
Pres the SINGLE SIDE TOASTING button (10) to activate the function. The indicator above
the relevant button will light up.
OPERATING PROCEDURE
1. Ensure that the crumb tray is in the correct position.
2. The appliance should be placed on a level surface, away from walls.
3. Unwind the power cord and insert the plug into a suitable electric socket.
4. Insert slices of bread into the slots. Ensure that the toaster lever is in the upper
position.
5. Turn on the power. Depress the toaster lever until it latches. The CANCEL button
indicator and the toasting level setting (“3” by default) will light up on the display.
The appliance will start operating. You can select the desired toasting level or an
auxiliary function:
• Levels 1 & 2: for cooled bread and thinner frozen foods such as frozen pancakes.
• Levels 3 & 4: for bakery, frozen waffles and thin French toasts.
• Levels 5 to 7: for thicker frozen foods such as hand-cut bread and thick French
toasts.
6. When the toasting process is over the lever will return to the upper position.
7. If you wish to interrupt the toasting, press the CANCEL button.
- SCOPE OF SUPPLY
- Toaster - 1 pc.
- User Manual - 1 pc.
NOTES:
- In order to slightly dry the bread use toasting level (1).
- For fresh bread, whole grain bread or slices with rough surfaces (e.g. English cakes)
use a higher toasting level.
5. MAINTENANCE
- Before cleaning disconnect the appliance from power supply by pulling the plug from
the socket and allow the appliance to fully cool down.
- Do not submerge the appliance in water or any other liquids.
- Wipe the outer surfaces of the toaster with damp cloth, then wipe dry.
16