Текст страницы
For UR002G
Nylon cutting head
NOTICE: Be sure to use genuine Makita nylon
cutting head.
1.
Put on the shoulder harness and fasten the
buckle.
► Fig.27
► Fig.25: 1. Nylon cutting head 2. Spindle 3. Hex
wrench 4. Loosen 5. Tighten
2.
Clasp the hook on the shoulder harness to tool's
hanger.
► Fig.28: 1. Hook 2. Hanger
1.
Insert the hex wrench through the hole in the tool
head to lock the spindle. Rotate the spindle until the hex
wrench is fully inserted.
3.
Adjust the shoulder harness to a comfortable
working position.
► Fig.29
2.
Place the nylon cutting head onto the spindle and
tighten it securely by hand.
3.
Remove the hex wrench from the tool head.
To remove the nylon cutting head, follow the installation
procedures in reverse.
The shoulder harness features a means of quick
release.
Simply squeeze the sides of the buckle to release the
shoulder harness.
► Fig.30: 1. Buckle
Plastic blade
For UR003G
NOTICE: Be sure to use genuine Makita plastic
blade.
1.
Wear the shoulder harness on your left shoulder.
► Fig.31
► Fig.26: 1. Plastic blade 2. Spindle 3. Hex wrench
4. Loosen 5. Tighten
2.
Clasp the hook on the shoulder harness to tool's
hanger.
► Fig.32: 1. Hook 2. Hanger
1.
Insert the hex wrench through the hole in the tool
head to lock the spindle. Rotate the spindle until the hex
wrench is fully inserted.
3.
Adjust the shoulder harness to a comfortable
working position.
► Fig.33
2.
Place the plastic blade onto the spindle and
tighten it securely by hand.
3.
Remove the hex wrench from the tool head.
To remove the plastic blade, follow the installation pro-
cedures in reverse.
The shoulder harness features a means of quick
release.
Simply squeeze the sides of the buckle to release the
tool from the shoulder harness.
► Fig.34: 1. Buckle
Adjusting the hanger position
OPERATION
For UR002G only
Attaching the shoulder harness
For more comfortable handling of the tool, you can
change the hanger position.
1.
Loosen the hex socket head bolt on the hanger
and slide it to a comfortable working position.
► Fig.35: 1. Hanger 2. Hex socket head bolt
CAUTION: When you use the tool in combi-
nation of the backpack-type power supply such
as portable power pack, do not use the shoulder
harness included in the tool package, but use the
hanging band recommended by Makita.
2.
Adjust the hanger position as shown in the figure
and then tighten the hex socket head bolt.
► Fig.36
1
The hanger position from the ground
2
The cutting tool position from the ground
If you put on the shoulder harness included in the
tool package and the shoulder harness of the back-
pack-type power supply at the same time, removing
the tool or backpack-type power supply is difficult in
case of an emergency, and it may cause an accident
or injury. For the recommended hanging band, ask
Makita Authorized Service Centers.
3
The horizontal distance between the hanger
and the unguarded part of the cutting tool
CAUTION: Always use the shoulder harness
attached to the tool. Before operation, adjust the
shoulder harness according to the user size to
prevent fatigue.
CAUTION: Before operation, make sure that
the shoulder harness is properly attached to the
hanger on the tool.
24
ENGLISH