Текст страницы
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
UR006G
UR007G
Handle type
Bike handle
Loop handle
No load speed
(at each rotation speed level)
Cutter blade
Plastic blade (305 mm)
3: 0 - 7,000 min
-1
2: 0 - 5,500 min
-1
1: 0 - 4,600 min
-1
Nylon cutting head
Plastic blade (255 mm)
3: 0 - 5,500 min
-1
2: 0 - 5,000 min
-1
1: 0 - 4,600 min
-1
Overall length
(without cutting tool and battery)
1,815 mm
Nylon cord diameter
2.4 mm
Applicable cutting tool and
cutting diameter
2-tooth blade
(P/N 198345-9)
255 mm
3-tooth blade
(P/N 195299-1)
255 mm
4-tooth blade
(P/N 196895-8)
255 mm
Nylon cutting head
(P/N 197993-1)
430 mm
255 mm
305 mm
Plastic blade
(P/N 198383-1)
(P/N 199868-0)
Rated voltage
D.C. 36 V - 40 V max
Net weight
5.7 - 6.3 kg
5.3 - 5.9 kg
Protection degree
IPX4
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications may differ from country to country.
•
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
BL4020 / BL4025* / BL4040* / BL4050F*
* : Recommended battery
Charger
DC40RA / DC40RB / DC40RC
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Recommended cord connected power source
Portable power pack
PDC01 / PDC1200
•
The cord connected power source(s) listed above may not be available depending on your region of residence.
•
Before using the cord connected power source, read instruction and cautionary markings on them.
12
ENGLISH