Текст страницы
Intended Use
The machine is intended for cutting, roughing, and
brushing metal and stone materials without using
water.
For cutting metal, a special protection guard for cut-
ting (accessory) must be used.
For cutting stone, a special extraction hood for cutting
with cutting guide (accessory) must be used.
With approved sanding tools, the machine can be
used for sanding with sanding discs.
Product Features
The numbering of the product features refers to the
illustration of the machine on the graphics page.
5 Grinder spindle
6 Extraction hood for sanding*
7 Mounting flange with O-ring
8 Carbide grinding head*
9 Clamping nut
10 Quick-clamping nut
*
11 Protection guard for sanding
12 Protection guard for cutting*
13 Grinding/cutting disc*
14 Hand guard*
15 Rubber sanding plate*
16 Sanding sheet*
17 Round nut*
18 Cup brush*
19 Cutting guide with dust extraction protection
guard *
20 Diamond cutting disc*
1 Release lever for protection guard
2 Spindle lock button
3 On/Off switch
4 Auxiliary handle
*The accessories illustrated or described are not
included as standard delivery.
Technical Data
Angle Grinder
GWS 1000
PROFESSIONAL
GWS 1000
PROFESSIONAL
GWS 1400
PROFESSIONAL
Article number
3 601 H21 0..
3 601 H21 0..
3 601 H24 0..
Rated power input
W
1000
1000
1400
Output power
W
630
630
820
No-load speed
rpm
11000
11000
11000
Grinding disc diameter, max.
mm
115
125
125
Thread of grinder spindle
M 14
M 14
M 14
Reduced starting current
–
–
z
Constant electronic control
–
–
z
Weight according to
EPTA-Procedure 01/2003
kg
2.1
2.1
2.2
Protection class
/II
/II
/II
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltage and models for specific countries, these
values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary.
Declaration of Conformity
Noise/Vibration Information
Measured
values
determined
according
to
EN 60745.
We declare under our sole responsibility that this
product is in conformity with the following standards
or standardization documents: EN 60745 according
to the provisions of the directives 89/336/EEC,
98/37/EC.
Typically the A-weighted noise level of the machine is:
sound pressure level 91 dB(A); sound power level
102 dB(A). Uncertainty K=3 dB.
Wear hearing protection!
Dr. Egbert Schneider
Senior Vice President
Engineering
Dr. Eckerhard Strötgen
Head of Product
Certification
Overall vibrational value (vector sum of three direc-
tions) determined according to EN 60745:
Grinding surfaces (roughing): Vibrational emission
value ah=8.5 m/s2, uncertainty K=2.0 m/s2.
Sanding with sanding discs: Vibrational emission
value ah=3.4 m/s2, uncertainty K=2.0 m/s2.
04.12.2006, Robert Bosch GmbH, Power Tools Division
D-70145 Leinfelden-Echterdingen
English | 21
1 609 929 K94 • 20.12.06