Текст страницы
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
DGA700
DGA900
Wheel diameter
180mm
230mm
Max. wheel thickness
7.2mm
6.5mm
Spindle thread
M14 or M16 or 5/8″ (country specific)
Rated speed (n)
7,800min
-1
6,000min
-1
Overall length
499mm
Rated voltage
D.C. 36 V
Battery cartridge
BL1815N, BL1820, BL1820B, BL1830, BL1830B, BL1840,
BL1840B, BL1850, BL1850B, BL1860B
Net weight
5.0 - 6.0 kg
5.2 - 8.0 kg
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications and battery cartridge may differ from country to country.
•
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Intended use
Vibration
The tool is intended for grinding, sanding and cutting of
metal and stone materials without the use of water.
Noise
The vibration total value (tri-axial vector sum) deter-
mined according to EN60745-2-3:
Model DGA700
Work mode: surface grinding with normal side grip
Vibration emission (ah, AG) : 7.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode: surface grinding with anti vibration side grip
Vibration emission (ah, AG) : 7.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode: disc sanding with normal side grip
Vibration emission (ah, DS) : 2.5 m/s
2 or less
Uncertainty (K) : 1.5 m/s
2
Work mode: disc sanding with anti vibration side grip
Vibration emission (ah, DS) : 2.5 m/s
2 or less
Uncertainty (K) : 1.5 m/s
2
The typical A-weighted noise level determined accord-
ing to EN60745-2-3:
Model DGA700
Sound pressure level (LpA) : 88 dB(A)
Sound power level (LWA) : 99 dB (A)
Uncertainty (K) : 3 dB(A)
Model DGA900
Sound pressure level (LpA) : 88 dB(A)
Sound power level (LWA) : 99 dB (A)
Uncertainty (K) : 3 dB(A)
Model DGA900
Work mode: surface grinding with normal side grip
Vibration emission (ah, AG) : 7.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
Work mode: surface grinding with anti vibration side grip
Vibration emission (ah, AG) : 7.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
NOTE: The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.
Work mode: disc sanding with normal side grip
Vibration emission (ah, DS) : 2.5 m/s
2 or less
Uncertainty (K) : 1.5 m/s
2
WARNING: Wear ear protection.
Work mode: disc sanding with anti vibration side grip
Vibration emission (ah, DS) : 2.5 m/s
2 or less
Uncertainty (K) : 1.5 m/s
2
WARNING: The noise emission during actual
use of the power tool can differ from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
NOTE: The declared vibration total value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also
be used in a preliminary assessment of exposure.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
6
ENGLISH