Текст страницы
13-1. Lock nut wrench
13-2. Shaft lock
15-1. Lock nut
15-2. Abrasive cut-off wheel
15-3. Inner flange
15-4. Wheel guard for cut-off wheel
16-1. Exhaust vent
16-2. Inhalation vent
17-1. Limit mark
18-1. Brush holder cap
18-2. Screwdriver
8-3. Bolt
9-1. Wheel guard
9-2. Screw
9-3. Bearing box
10-1. Bearing box
10-2. Wheel guard
10-3. Screw
10-4. Lever
11-1. Screw
12-1. Lock nut
12-2. Depressed center grinding
wheel/Multi-disc
12-3. Inner flange
ENGLISH
Explanation of general view
1-1. Shaft lock
2-1. Lock button / Lock-off button
2-2. Switch trigger (typeA)
3-1. Lock lever
3-2. Switch trigger (type B)
4-1. Indication lamp
6-1. Protrusion of loop handle
6-2. Matching hole in gear housing
7-1. Loop handle
7-2. Hex wrench
7-3. Bolt
8-1. Loop handle
8-2. Hex wrench
SPECIFICATIONS
Model
GA5020
GA5021
GA5020C /
GA5021C
GA6020
GA6021
GA6020C /
GA6021C
Depressed center wheel diameter
125 mm
125 mm
125 mm
150 mm
150 mm
150 mm
Spindle thread
M14
M14
M14
M14
M14
M14
No load speed (no) / Rated speed (n)
11,000(min-1)
11,000(min-1)
10,000(min-1)
10,000(min-1)
10,000(min-1)
9,000(min-1)
Overall length
356 mm
384 mm
390 mm
356 mm
384 mm
390 mm
Net weight
2.2 kg
2.3 kg
2.5 kg
2.2 kg
2.3 kg
2.5 kg
Safety class
/II
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
Vibration emission (ah,AG) : 9 m/s2
Uncertainty (K) : 1.5 m/s2
Cutting-off or wire brushing may have different vibration
emission values.
For Model GA5021
ENG102-1
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745-2-3:
Sound pressure level (LpA) : 90 dB(A)
Sound power level (LWA) : 101 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
ENG208-2
Vibration
The
vibration
total
value
(tri-axial
vector
sum)
determined according to EN60745-2-3:
Work mode : surface grinding
Vibration emission (ah,AG) : 13.5 m/s2
Uncertainty (K) : 1.5 m/s2
Cutting-off or wire brushing may have different vibration
emission values.
• Note: Specifications may differ from country to country.
ENE048-1
Intended use
The tool is intended for grinding, sanding and cutting of
metal and stone materials without the use of water.
ENF002-1
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
For Model GA5020
ENG102-1
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745-2-3:
Sound pressure level (LpA) : 89 dB(A)
Sound power level (LWA) : 100 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
ENG208-2
Vibration
The
vibration
total
value
(tri-axial
vector
sum)
determined according to EN60745-2-3:
Work mode : surface grinding
4