Текст страницы
ENGLISH en
and its implementation in national legal systems,
used power tools must be collected separately and
handed in for environmentally compatible recycling.
14. Technical Specifications
Explanation of details on page 3. Subject to
changes serving technical progress.
Dmax
=max. diameter of accessory
tmax,1
=max. permitted thickness of clamping
shank on accessory when using clamping
nut (9)
tmax,3
=max. permitted thickness
of accessory
M
=Spindle thread
l
=Length of the grinding spindle
n
=Rated speed (maximum speed)
P1
=Nominal power input
P2
=Power output
m
=Weight without mains cable
Measured values determined in conformity with
EN 60745.
Machine in protection class II
~
Alternating current
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).
Emission values
These values make it possible to assess the
emissions from the power tool and to compare
different power tools. Depending on the operating
conditions, the condition of the power tool or the
accessories, the actual load may be higher or lower.
For assessment purposes, please allow for breaks
and periods when the load is lower. Based on the
adjusted estimates, arrange protective measures
for the user e.g. organisational measures.
Vibration total value (vector sum of three directions)
determined in accordance with EN 60745:
ah, SG
= Vibration emission value
(surface grinding)
ah, DS
= Vibration emission value
(disc sanding)
Kh,SG/DS
= Uncertainty (vibration)
Typical A-effective perceived sound levels:
LpA
=Sound pressure level
LWA
=Acoustic power level
KpA, KWA= Uncertainty
Wear ear protectors!
17