Текст страницы
Preparations 1. Place and use the machine on the solid and flat surface. 2. Confirm that the removable shredding block is safely attached to
the shred bin.
3. Power cable is compatible with any standard 220-240В power
socket.
4. Use the device only after it has been properly assembled.
Using the machine
DoCash A-FEED is operated by using an engine switch, which
placed on top of the shredder and includes three positions – AUTO,
OFF, REVERSE.
Remove all staples and paper clips if possible! This will extend the
life of the shredder.
1. Insert the plug into a power outlet.
2. Put the closing cover (7) in the working position
3. Set the switch to the "AUTO" position.
4. Load up to 5 sheets of paper (in manual mode) into the paper feed
slot (5) and the shredder will automatically turn on.
5. Load up to 50 sheets of paper (in auto feed mode) into the paper
feed slot (4), the shredder will automatically turn on
6. To shred CDs, insert 1pc into the shredding slot (6), the shredder
will automatically turn on.
7. In REVERSE mode shredder runs in reversed feeding
process. This mode is used for removing jams, stuck paper or any
other objects.
Do not set the switch to the REV position when
shredding a credit card, or the shredder may be
damaged. The shredder cannot destroy paper and
credit card at the same time, but can only destroy one
credit card at a time
It is recommended to use the REVERSE mode (for 3
-5 seconds) to clean the cutting unit from paper
scraps.
8. To turn off the device set the switch to the OFF position
DoCash A-FEED
8
www.docash.de