Текст страницы
10
EN
STORAGE
• Slightly sway the iron back and forth, until all the
water leaves the water tank (10), release the button
(13) «Self Clean».
• Place the iron on its base (9) and let the soleplate
(11) cool down completely.
• After the soleplate (11) cools down, wipe it with a dry
cloth.
• Before taking the iron away for storage make
sure that the water tank (10) is empty, andthe iron
soleplate (11) is dry.
• Before taking the iron away for storage drain the
remaining water from the water tank (10) and clean
the iron.
• Set the temperature control knob (12) to the position
«MIN» and switch the continuous steam supply knob
(3) to the position «
» (the steam supply is off).
• Wind the power cord around the base (9).
• Store the iron vertically in a dry cool place out of
reach of children and disabled persons.
CLEANING AND MAINTENANCE
DELIVERY SET
1.
Iron – 1 pc.
2.
Beaker – 1 pc.
3.
Instruction manual – 1 pc.
TECHNICAL SPECIFICATIONS
- Power supply: 220-240 V, ~ 50/60 Hz
- Rated input power: 2600 W
- Water tank capacity: 380 ml
- Continuous steam: up to 25 g/min
- Steam release: 140 g/min
• Before cleaning make sure that the iron is switched
off and cold and the power plug is not connected to
the mains socket.
• Wipe the iron body with a slightly damp cloth and
then wipe it dry.
• You can remove the mineral deposit from the iron
soleplate (11) with a cloth soaked in table vinegar.
• After removing the mineral deposit polish the
soleplate (11) surface with a dry clean cloth.
• Do not use abrasives or solvents to clean the iron
soleplate (11) and body.
• Avoid contact of the iron soleplate (11) with sharp
metal objects, as well as with metal buttons, zippers
etc.
• Do not immerse the iron, the power cord and the
power plug into water or any other liquids.