Текст страницы
10
EN
• You can remove the mineral deposit from the iron
soleplate (12) with a cloth soaked in table vinegar.
• After removing the mineral deposit polish the
soleplate (12) surface with a dry clean cloth.
• Do not use abrasives or solvents to clean the iron
soleplate (12) and body.
• Avoid contact of the iron soleplate (12) with sharp
metal objects, as well as with metal buttons, zippers
etc.
• Do not immerse the iron, the power cord and the
power plug into water or any other liquids.
STORAGE
• Open the lid (2), fill the tank with water up to the
MAXimal mark «МАХ» and close the lid (2).
• Place the iron on the detachable base (9).
• Insert the power plug into the mains socket.
• Set the temperature control knob (13) to the «MAX»
position, the indicator (6) will light up.
• When the iron soleplate (12) reaches the set
temperature, the indicator (6) will go out and you can
start cleaning the steam chamber of the iron.
• Remove the power plug from the mains socket.
• Remove the iron from the base (10).
• Hold the iron above the sink horizontally, press and
hold down the button (14) «SELF-CLEAN».
• Boiling water and steam with scale will be intensively
released from the soleplate (121) openings.
• Slightly sway the iron back and forth, until all the
water leaves the water tank (10).
• Place the iron on the detachable base (10) and allow
the iron soleplate (12) to cool completely.
• After the soleplate (12) cools down, wipe it with a dry
cloth.
• Before taking the iron away for storage make
sure that the water tank (11) is empty, andthe iron
soleplate (12) is dry.
• Before taking the iron away for storage drain the
remaining water from the water tank (11) and clean
the iron.
• Set the temperature control knob (13) to the position
«MIN» and switch the continuous steam supply knob
(3) to the position «
» (the steam supply is off).
• Secure the iron to the detachable base (10) with the
latch (8) in the «
» position.
• Wind the power cord around the base (10).
• Store the iron vertically in a dry cool place out of
reach of children and disabled persons.
CLEANING AND MAINTENANCE
DELIVERY SET
1.
Iron – 1 pc.
2.
Detachable base - 1 pc.
3.
Beaker – 1 pc.
4.
Instruction manual – 1 pc.
• Before cleaning make sure that the iron is switched
off and cold and the power plug is not connected to
the mains socket.
• Wipe the iron body with a slightly damp cloth and
then wipe it dry.