Текст страницы
IM2022
Every day fill the tank with fresh filtered water and keep the unit clean.
8. OPERATION OF THE DEVICE
T-HU6-A20M-W
Switching on
Install the appliance vertically on a flat and dry surface, fill the tank with water then
connect the device to the power line. Turn on/off and steam outlet intensity knob all the
way to the right. The appliance will switch on, the blue operation indicator will light up
on the control panel and steam will start coming from the atomizer. At the very
beginning of operation, the atomizing level may appear unstable, which is caused by
the temperature difference and water quality. It will take a short period time for this
process to stabilize.
Adjusting steam outlet intensity
You can adjust steam intensity by turning on/off and steam outlet intensity knob to the
left or right.
Comfortable conditions are reached at 40 to 60% relative air humidity. You can
yourself determine the comfortable humidity level or use a special device called a
hygrometer (not included in the set), measuring the relative humidity level.
ATTENTION!
If a large amount of condensate is generated on the upper part of the appliance when it
is operating, then you need to decrease the steam outlet intensity by turning on/off and
steam outlet intensity knob counterclockwise.
Switching off
To switch the appliance off, turn on/off and steam outlet intensity knob all the way to
the left and disconnect the appliance from the electric mains.
20