Текст страницы
Double tripwire setting interface
(1) Select the rule number, set the event as double trip wire, and check [Enable] to enable the rule.
(2) Draw 2 rule lines, and indicate the direction in which it is forbidden to cross with the arrows on
the rule line. The directions of the 2 rule lines should be the same. An alarm will be issued when
crossing two lines continuously within the specified time.
(3) Set the maximum and minimum time intervals, which means the time range of crossing two rule
lines consecutively.
(4) Set whether to display alarm statistics, display alarm rules, two-way alarm and display target.
(5) Click save after setting.
[Event Type] = > [Behavior Analysis] = > [Perimeter]
102