Инструкция IP-камера Tiandy TC-C38XS I3/E/Y/M/2.8mm/V4.0

Event input setting interface

Set port event detection related parameters.

(1) Select the input port, check the [Enable] check box to enable the port alarm detection function,

and uncheck to turn off the port alarm detection function.

(2) [Mode Set] set normally open and normally closed, where [NO] refers to the alarm when the

disconnected line is short circuited, and [NC] refers to the alarm when the connected line is

disconnected.

(3) The user can set the [Schedule] as required, and only detect the alarm within the set date and

time period.

(4) Set [Linkage Mode]to realize the alarm linkage after triggering the alarm, such as[Common link],

[Alarm Output], [Link Snap],[ l PTZ linkage channel], etc.

(5) Click [Save] to save the corresponding parameter settings, and click [Copy to…] copy the

parameters of the current port number to other port numbers. Click [Cancel]o restore the last

saved parameter.

95