Текст страницы
76 English
; This is normal and natural feature for ceramic hob. Programmer of ceramic hob,
together with the thermostat or thermocouple in heating element, could control
the hob work at set power level and avoid overheat by heating element work on/off
alternately.
; If working at highest power level, heating element will continue turn on for a certain
time then on/off alternately.
; If working at other lower power level, heating element will on/off alternately at certain
frequency since beginning based on power setting of the cooking zone.
Failure Inspection for induction hob
If an abnormality comes up, the induction hob will enter the protective state automatically
and display corresponding protective codes:
Problem
Possible causes
What to do
E1/E2
Abnormal supply voltage
Please check whether power supply is
normal, Power on after the power supply is
normal.
E3
High temperature of the pan
sensor
Check whether no liquid in pan, fill with
liquid then restart.
E5
High temperature of the IGBT
temperature sensor
Please restart after the induction hob cools
down.
For all other error codes, switch off and call your service provider.