Текст страницы
10
EN
control (28), while the illumination of the decorative
indicators (15) and the operation mode indicators
(16, 17, 18, 19, 20, 21) will go out, to switch on the
illumination of the operation mode indicators and the
decorative indicators, press the button (13) «
» on
• Press again the buttons (11 or 26) to set the timer
operation time. Timer operation time can be set from 1
hour to 8 hours with 1 hour setting step.
• To switch the timer off, repeatedly press the button (11
or 26) until the timer operation symbols on the display
(14) go out.
Air flow type selection button
• By pressing the button (12) «
» on the control panel
the control panel (5) or the button (27) «
» on the
remote control (28), the illumination of the decorative
indicators (15) and the operation mode indicators
(16, 17, 18, 19, 20, 21) will switch on.
• To turn off the fan, press the «
» button (8) on the
Control Panel (5) or the «
» button (22) on the
Remote Control (28) and remove the Power Cable
plug from the mains.
CLEANING AND MAINTENANCE
(5) or the button (23) «
» on the remote control (28),
you can select the type of air flow, the type of air flow is
displayed on the display panel (4) by the indicators (19,
20, 21) «
,
,
».
-
indicator (19) «
», «breeze»; the air flow speed is
chaotically changing: from soft breeze to strong gust
of wind.
-
indicator (20) «
», «normal air flow», the air flow
speed can be changed by pressing the buttons (9
or 24);
-
indicator (21) «
», «night» mode, the air flow speed
increases and decreases gradually.
Decorative and operation mode indicators on/off
button
• To switch off the illumination of the decorative indicators
(15) and indicators of operating modes (16, 17, 18,
• Before cleaning the fan, switch it off and unplug it.
• Wipe the fan body with a slightly damp cloth and then
wipe it dry.
• Do not use liquid detergents, abrasive cleaners and
any solvents to clean the fan (2).
• To avoid the risk of electric shock provide that no
water or other liquid gets into the fan body.
• You can use a vacuum cleaner with an appropriate
attachment to clean the Air-Inlet Grill (7) and the
Outgoing Airflow Grill (3).
19, 20, 21), press the button (13) «
» on the control
panel (5) or the button (27) «
» on the remote