Текст страницы
9
EN
Control (23), you can select the mode of airflow to
be displayed on the Indication Panel (3) through the
indicators (20).
• You can select one of the 6 airflow speed options.
• Avoid exposing the receiver to direct sunlight,
otherwise false activation of control commands is
possible.
• When you are not using the remote control (21),
insert it into the carrying handle (5) on the fan.
Selecting the airflow type
FAN USAGE
• Press the «BLOW» button (9) on the Control Panel
(4) or the «BLOW» button (24) on the Remote
Control (21), select the airflow type.
• The airflow type is displayed through the indicators
(15, 16, 19) on the Indication Panel (3):
• Place the fan Base (1) on a flat, dry and steady
surface.
• Do not place the fan on soft surfaces, such as
carpets with high pile, sofas, or beds.
• Insert the plug of the power cord into an electric
socket, while room air temperature will be displayed
with numeric symbols (12) on the indication panel (3),
and symbol (13) «ºС» will light up.
Note: numeric temperature readings may slightly differ
from readings of other thermometers.
-
(15) «
» - normal mode - normal air ventilation;
-
(16) «
» - «Night Mode» (16), you can choose
one of 6 airflow speed options. In this mode,
the airflow speed will gradually decrease from
the current setting every twenty minutes until it
reaches the lowest airflow speed level.
Note:
Switching the fan on/off and selecting the airflow
speed
-
to turn on the «night mode» by the remote control
(21), press the button (27) «NIGHT MODE»,
and the indicator (16) «
» will light up on the
indication panel (3). To turn off the «night mode»,
press the button (27) «NIGHT MODE» on the
remote control (21) again, and the indicator (16) «
» will go out.
-
When you turn on the «night mode», the indication
panel (3) will go out after 8 seconds. Press any
button to turn on the indication panel (3).
• To turn on the fan, press the «ON/OFF» Power
Button (11) on the Control Panel (4) or the «ON/
OFF» button (22) on the Remote Control (21) – the
fan will turn on.
• To turn off the fan, press the «ON/OFF» Power
Button (11) on the Control Panel (4) or the «ON/
OFF» button (22) on the Remote Control (21) a
second time - the fan will turn off.
• Press the «SPEED» (10) on the Control Panel
(4) or the «SPEED» buttons (21) on the Remote