Текст страницы
10
EN
Fan operation time timer
CLEANING AND MAINTENANCE
• To set the fan operation time, press the «
»
«TIMER» button (12) on the control panel (4) or the «
• Before cleaning the fan, switch it off and unplug it.
• Wipe the fan body with a slightly damp cloth and then
wipe it dry.
• Do not use liquid detergents, abrasive cleaners and
any solvents to clean the fan.
• To avoid the risk of electric shock provide that no
water or other liquid gets into the fan body.
• You can use a vacuum cleaner with an appropriate
attachment to clean the Air-Inlet Grill and the
Outgoing Airflow Grill (2).
STORAGE
» «TIMER» button (27) on the remote control (22);
the «TIMER» symbol (15) and «Hr» indicator (18) on
the indication panel (3) will light up.
• Tap the buttons (12 or 27) to set the timer. Setting the
timer from 1 hour to 12 hours with 1 hour increment.
The set time will be displayed on the indication panel
(3) with numeric symbols (19) and the «TIMER»
symbol (15) and «Hr» indicator (18).
• Tap the buttons (12 or 27) until all the indicators (19)
go out to switch the timer off.
Switching the fan oscillation on/off
• • To turn the oscillation mode on, press the «
»
«OSC» button (13) on the control panel (4) or the «
» «OSC» button (24) on the remote control button
(22) the symbol and indicator «OSC
» (20) will
light up; to turn the oscillation mode off, press the «
• After cleaning put the fan away for storage in a dry
cool place away from children and disabled persons.
• Remove the battery from the remote control (22) if it
will not be used for a long time.
• Before using the fan next time, it is recommended to
check the unit operability and integrity of the power
cord isolation and the power cord plug.
DELIVERY SET
1.
Fan — 1 pc.
2.
Base – 1pc.
3.
Remote control - 1
4.
Instruction manual — 1 pc.
» «OSC» button (13) on the control panel (4) or
the «
» «OSC» button (24) on the remote control
(22).
• After operation switch the fan off by pressing the «
» «ON/OFF» power button (9) on the control panel
(4) or the «ON/OFF» button «
» (23) on the remote
control (22), remove the power plug (8) from the
mains socket.