Текст страницы
ENGLISH
INSTALLATION
DOWNLOAD CORSAIR iCUE
> For the full CORSAIR iCUE experience, please download our latest CORSAIR iCUE software
at www.corsair.com/downloads.
> Connection notes
• Connect the fans in sequential order from 1 > 2 > 3 > 4 > 5 > 6.
• Animations begin with fan 1 and proceed through fan 6.
WARNING: Any fan not connected in series will break communication
and the RGB LED lighting function will not work.
> Turn your system off prior to installing your QL RGB fans and
the Lighting Node CORE.
> Mount the fan(s) to the location of your choice in the chassis with
the mounting screws.
* An internet connection is required for software download.
CORSAIR iCUE is required for lighting control.
> Find a location for the CORE that allows connection for all the fans’
RGB LED cables installed in your system to reach the CORE
then mount it with the provided mounting strips.
> Plug the 9-pin USB cable from the CORE into an available internal USB 2.0
header in your system.
• Refer to your motherboard manual for the location of the USB 2.0 header.
> Connect the SATA power connector to any available SATA connector from your system power supply.
1
2