Текст страницы
Fault clearance
Basic parameters
Installation
Application
Product name
Smartmi Standing Fan 2S
Nominal voltage
100V - 240V
Power cord
1.5m
Blast up and down
Attach the power/battery to charge
Connect with Mi Home / Xiaomi Home App
Faults
Fault reasons
Solutions
Model
ZLBPLDS03ZM
Nominal frequency
50/60Hz
Battery type
Lithium-ion battery pack
This product works with Mi Home / Xiaomi Home app*.
Control your device with Mi Home / Xiaomi Home app.
Dead power outlet
Replace with a live
outlet
Upward 25°
Gross weight
approx. 4.9kg
Nominal power
25W
Rated capacity of
battery
2800mAh（33.6Wh）
Net weight
approx. 3.5kg
Product size
340mm×330mm×960mm
Noise
≤60dB(A)
Correctly attach the
power cord
Gentlely lift or press
the head or cover
of the fan to adjust
the blast orientation
upwards or downwards
Scan the QR code to download and install the app. You will be directed
to the connection setup page if the app is installed already. Or search
"Mi Home / Xiaomi Home" in the app Store to download and install it.
The power cord
is not attached in
place
Downward15°
The fan does not
work
Attach the end of the power cord to the power interface at the back of
the base and then insert the plug to attach the power to charge.
The fan base can be used independently by pulling out the power cord
if the batteries inside the base are fully charged. Fan operation will
charge the battery fully instead of consuming it when the fan installed
with battery is connected to the power.
Wi-Fi IEEE 802.11 b/g/n
2.4GHz
Wireless
connection
Max. RF Output
Power
Wi-Fi 2.4G (2400-2483.5MHz): <20dBm
Open Mi Home / Xiaomi Home app, tap "+" on the upper right, and then
follow prompts to add your device.
The support and
base of the fan are
not installed in place.
Align the fan support
with the base socket,
and lock the connected
screws.
Regulatory compliance information
The channel of the
router is 5G.
Connect to the 2.4G
channel of the router.
Europe — EU declaration of conformity
End of the power cord
Mobile APPs take up
too much memory.
Completely close and
restart the APP
More Functions
Cannot connect
to Wi-Fi
*The app is referred to as Xiaomi Home app in Europe (except for Russia). The name
of the app displayed on your device should be taken as the default.
About “works with mijia”
We Beijing Smartmi electronic technology Co., ltd. hereby, declares that this equipment is in
compliance with the applicable directives and european norms, and amendments.
The full text of the EU declaration of conformity is available at the following internet address:
https://smartmi.com.cn/doc.html
You can use APP to switch on natrual breeze mode, set oscillating angle
and Timer setting.
Reset Wi-Fi
(Reset as per the Wi-Fi
module)
The fan does not
connect to the
Internet for more
than half an hour.
Note: The version of Mi Home app might have been updated, please follow the
instructions based on the current app version.
Disposal and recycling information
Turn off the fan and take
out the foreign matters.
“works with mijia” means the product can be controlled by mijia APP or
Xiao‘ai .Please note that “works with mijia” only acts as the verification
of the software. Xiaomi and mijia are not responsible for the production,
standards implementation, quality supervision and the like of the product.
Fan blades are
blocked by foreign
matters.
Correct disposal of this product. This marking indicates that this product should not be disposal with other household
wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and
collection systems or contact the retailer where the product was purchased. They can take this product for environmental
safe recycling.
Motor fault
Contact the after-sales
personnel
Fan blades block
and stop with
a long blast of
sound from the
fan for three
times and four
flashing status
indicator lights.
Manufacturer：Beijing Smartmi Electronic Technology Co., Ltd. Address：11-1102, Office Building Rainbow City, NO.68 Qinghe Mid-Street, Haidian District, Beijing, P.R. China
190328-C
7
9
Application
Maintenance
Function introduction
Cleaning of the fan
Parts cannot be cleaned
The following parts should be slightly wiped with a soft and dry cloth.
Parts can be cleaned
The following parts can be cleaned with a soft cloth or sponge using
clear water or diluted neutral detergent.
Please read the operation mannual carefully and keep it properly before using the product. Operation Mannual of Smartmi Standing Fan 2S
4
Fan blade knob
On/off and gear shift setting
Oscillation control setting
On
Press the button to set whether or not to oscillate the fan.
The fan will automatically turn back to the right place after it is
turned off.
11
12
13
Press the
button to turn on the fan. Set the blast gear to1 when the
fan is first used and turned on.When the fan is turned on again, the blast
gear will default to the one it used last time.
Fan grille
Fan blade
Fan back cover
Off
Wi-Fi module resetting
Long press the
button for 2 seconds to stop the fan from working.
When your phone cannot connect with the fan, please press down the
3
Status indicator light
and the buttons at the same time for 5 seconds， until you
hear the sound of “dididi” to reset the Wi-Fi.
Base
Wi-Fi indicator status display
5
Press the button to change the fan speed. The blast will be switched
between1、 2、 3、 4 while the corresponding status indicator light will
on with each press (see table below).
1
Connected
Always on
Fan cover knob
Motor + Support
Gear
Off
1
2
3
4
Not connected
Flashing light
Display
Do not flush the above parts with water.
Do not use diluents, light gasoline, detergents or alkaline detergents.
status
Make sure that the disassembling and cleanning of the fan are performed
after it stops working. Please completely dry the parts after cleaning and avoid
direct sunlight before installing and using them again.
Light off
Light on
8
10