Текст страницы
How to Use
Connecting to an electrical outlet
Switching mode
Plug the power adapter into a suitable electrical
outlet. When you hear a beep, the fan is successfully
connected to power.
Turning on/standing by
Turning on
•Press the button to cycle through the direct breeze, natural breeze, and
sleep mode.
•When in direct breeze or natural breeze mode, the corresponding
indicator will remain on.
•In natural breeze mode, pressing the speed button can switch among
four natural breeze settings, which are lakeside, camping, green, and
terrace. The indicators represent four settings in an order as indicated
in the table by default. The order can be changed in the app.
Press the button to start the fan. When turned on for the first time, the
fan is at the direct breeze mode with the speed level of slow, by default.
1
2
3
4
Standing by
Indicator
Press the button to stop the fan while it is running.
Natural breeze mode
Camping
Lakeside
Green
Terrace
Indicator status
Unplug the power adapter to turn the fan off.
Turning off
Switching the speed
•When switching to sleep mode, the sleep mode indicator will light
up and all indicators will then go out if there are no operations
within five seconds, to prevent the lights from affecting sleep.
•After the fan is turned off and turned back on again, the mode will
be the last used one.
Note: The natural breeze mode can be customized in the Mi Home/Xiaomi Home app.
Press the button to adjust the speed, and the corresponding speed
indicator will light up (see table below). After the fan is turned off and
turned back on again, the speed will be the last used one.
Setting the oscillation
1
2
3
4
Indicator
Speed level
Slow
Medium
Fast
Turbo
Indicator status
Notes:
•
means the indicator is on; means the indicator is off.
•In the natural breeze mode, the indicators 1, 2, 3, and 4 respectively represent the mode of
lakeside, camping, green, and terrace by default. You can go to the app to check the details.
Press the button to enable or disable oscillation. You can set the
oscillation angle range in the app. After the fan is turned off and
turned back on again, the oscillation setting will be the last used one.
Unplug then plug the fan in or reset the Wi-Fi connection, then turn
on the fan. It will automatically calibrate its oscillating angle if the
oscillation function is enabled. The calibration time varies depending
on different angles, please wait with patience.
Note: When the Wi-Fi connection is reset, the oscillation angle range will change to the default
angle of 90°.
8