Текст страницы
(Original Instructions) ENGLISH
Cable length (m)
7.5
15
25
30
45
60
Voltage
Amperes
Cable rated current (Ampere)
Position of date code
The Date Code, which also includes the year of manufacture,
is printed into the housing.
Example:
2017 XX JN
Year of manufacturing
110-127
0 - 2.0
6
6
6
6
6
10
2.1 - 3.4
6
6
6
6
15
15
3.5 - 5.0
6
6
10
15
20
20
5.1 - 7.0
10
10
15
20
20
25
7.1 - 12.0
15
15
20
25
25
-
12.1 - 20.0
20
20
25
-
-
-
220-240
0 - 2.0
6
6
6
6
6
6
2.1 - 3.4
6
6
6
6
6
6
PACKAGE CONTAINS
1 1/3 Sander
1 Instruction manual
1 Warranty card
1 Service center list
1 Sanding paper
Check for damage to the tool, parts or accessories which
may have occurred during transport.
Take the time to thoroughly read and understand this
manual prior to operation.
3.5 - 5.0
6
6
6
6
10
15
5.1 - 7.0
10
10
10
10
15
15
7.1 - 12.0
15
15
15
15
20
20
12.1 - 20.0
20
20
20
20
25
-
FEATURES (FIG. A)
WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
1. On/off switch
2. Lock-on button
3. Sanding base
4. Paper clamp lever
LABELS ON TOOL
The label on your tool may include the following symbols:
ASSEMBLY
must read the instruction manual before use.
WARNING! To reduce the risk of injury, the
user
Wear safety glasses or goggles.
WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect tool from
power source before making any adjustments or
removing/installing attachments or accessories.
Before reconnecting the tool, depress and
release the trigger switch to ensure that the tool
is off. An accidental start-up can cause injury.
Fitting sanding paper (Figure. A,B)
Wear ear protection.
WARNING! Never use the tool without a sanding
paper or accessory in place.
Wear a dust mask.
V
Volts
Direct Current
A
Amperes
n0
No-Load Speed
Hz
Hertz
Class II
Construction
W
Watts
Earthing
Terminal
•
Soften the sanding paper by rubbing its non-abrasive
side over the edge of a worktop.
•
Release the sanding paper clamp levers (4).
•
Place the paper onto the sanding base (3).
•
Insert the edge of the sanding paper into the front paper
clamp as shown.
•
Press the front paper clamp lever (4) downwards.
•
While keeping a slight tension on the paper, insert the
rear edge of the paper into the rear paper clamp.
•
Press the rear paper clamp lever (4) downwards.
min
minutes
Safety
Alert
Symbol
USE
WARNING:Let the tool work at its own pace. Do
not overload.
Alternating
Current
/min.
Revolutions or
Reciprocation
per minute
Switching on and off
•
To switch the tool on, press the on/off switch (1).
•
For continuous operation, press the lock-on button (2)
and release the on/off switch.
7