Текст страницы
GND
ACC(+12V)
ACC
+12V
B+
Connect the BATT (+) power cord to the source providing stable 12V
voltage.
Connect the ACC cord to the power source (ignition circuit).
Connect the GND (-) cord to the car body.
Attention! The color of the wires can be different for each unit. See the
labels on the wires to avoid improper operation of the device.
The Emergency recording is activated automatically when the G-sensor
triggers (sudden acceleration/deceleration), or at a collision. The files
protected from overwriting are stored on the memory card in the
EVENT folder, but can also be overwritten by other emergency files.
CAUTION! Overwritten files cannot be recovered. In the event of an
accident, we recommend stopping the recording and saving the
necessary recordings to your phone or computer.
Troubleshooting
• Cannot take pictures/record video
Check if there is enough free space on the microSD card and if it is not
blocked.
• Spontaneous stop at recording
Too many video files are stored. Only use at least class 10 high-speed
microSD cards by proven manufacturers.
We recommend using 256 GB memory cards prepared for record in 4K,
where the recording speed is at least 40 Mbit/s.
• Blurred image
Check if there is any protective film, dirt or fingerprints on the lens.
Wipe the lens with a soft cloth before use. (it is recommended to use
special care products for the optics in order not to damage the surface
of the lens)
4